Need help?Do you have a question about the Nokia Beacon 6 and is the answer not in the manual?
General| Type | Wi-Fi Router |
|---|---|
| Wi-Fi Standard | 802.11ax |
| Security | WPA3 |
| Mesh Networking | Yes |
| Parental Controls | Yes |
| Guest Network | Yes |
| MU-MIMO | Yes |
| OFDMA | Yes |
| Beamforming | Yes |
| Processor | Quad-core |
| Memory | 512MB RAM |
| Flash Memory | 256MB |
| Operating Humidity | 10% to 90% non-condensing |
| Security Features | Firewall, VPN |
| Power | 12V |
| Operating Temperature | 0°C to 40°C |
| Wi-Fi Technology | Wi-Fi 6 |
| Bands | 2.4 GHz, 5 GHz |
Defines the scope of the documentation set for Beacon 6 equipment.
Identifies the intended audience for this documentation set.
Specifies the prerequisites for understanding the document.
Refers to the Glossary for definitions of terms.
Provides contact information for support and ordering.
Details Nokia's quality practices and compliance with standards.
Directs users to the safety guidelines chapter.
Informs about document availability via ALED or OLCS.
Explains how special information like Danger, Warning, and Caution is presented.
Explains how to search multiple PDF files using Adobe Reader.
Describes safety instructions provided in customer documentation and on equipment.
Details compliance with North American safety standards like FCC and EMC.
Describes safety instructions provided in customer documentation and on equipment.
Details compliance with European safety standards like EMC, RF, and electrical safety.
Covers China Restriction of Hazardous Substances regulations for electronic products.
Details environmental requirements for handling, transportation, and disposal.
Lists part numbers and identification details for the Beacon 6 device.
Provides an overview of the Beacon 6's WiFi capabilities and benefits.
Details supported software and installation features for the device.
Describes the device's physical interfaces and their capacities.
Explains the meaning of the LED indicators on the Beacon 6.
Lists the physical dimensions and power specifications of the Beacon 6.
Illustrates the internal functional blocks of the Beacon 6 device.
Highlights specific considerations for WiFi service and certifications.
Outlines the objectives of the installation chapter.
Describes the general steps for installing and cabling the Beacon 6.
Lists items required before starting the installation procedure.
Specifies the tools needed for installing the Beacon 6.
Provides crucial safety precautions for unit installation.
Details the step-by-step process for installing the Beacon 6.
Outlines the objectives of the replacement chapter.
Describes the general steps for replacing the Beacon 6.
Lists items required before starting the replacement procedure.
Specifies the tools needed for replacing the Beacon 6.
Provides crucial safety precautions for unit replacement.
Details the step-by-step process for replacing the Beacon 6.
Explains how to use the web-based GUI for device configuration.
Details the procedure for logging into the Beacon 6 web-based GUI.
Describes how to view device and connection status information.
Covers configuration options for LAN, WAN, IP routing, DNS, and Mesh.
Details security settings including Firewall, MAC Filter, IP Filter, and Parental Control.
Covers application settings like Port Forwarding, Port Triggering, DDNS, NTP, UPnP/DLNA.
Covers maintenance tasks such as password change, device management, and firmware upgrade.
To Next Page
