Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B)
Issue: 01 3FE-47429-AAAA-TCZZA 101
Figure 42 DMZ and ALG window
Table 35 describes the fields in the DMZ and ALG window.
Table 35 DMZ and ALG parameters
Field Description
ALG Config Select the checkboxes to enable the protocols to be supported by the ALG: FTP,
TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTP
DMZ Config
WAN Connection List Choose a WAN connection from the drop-down menu
Enable DMZ Select this checkbox to enable DMZ on the chosen WAN connection
DMZ IP Address Choose Customer Setting and enter the DMZ IP address or choose the IP
address of a connected device from the drop-down menu
5 Click Save DMZ.
6 STOP. This procedure is complete.
2
Configure ALG.
3
Click Save ALG.
4
Configure DMZ.
To Next Page
Loading...
