Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B)
Issue: 01 3FE-47429-AAAA-TCZZA 103
WAN Choose a connection from the drop-down menu
Enable Trusted Network Select the checkbox to enable or disable
ICMP, Telnet, SSH, HTTP, TR069,
HTTPS
Select an access control level for each protocol:
• WAN side—Allow, Deny, or Trusted Network Only
• LAN side—Allow or Deny
Trusted Network
Source IP Start Enter a start IP address for the new subnet trusted network
Source IP End Enter an end IP address for the new subnet trusted network
2 Select a WAN connection from the drop-down menu.
3 Click to enable or disable Trusted Network.
4 Select an access control level for each protocol: ICMP, Telnet, SSH, HTTP, TR-069, and HTTPS for
the WAN side and the LAN side.
5 Click Save.
6 Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
8.1.5 Application configuration
The Beacon 6 (HA-0336G-A) supports application configuration, including:
• port forwarding
• port triggering
• DDNS
• NTP
• UPnP and DLNA
Procedure 32 Port forwarding configuration
7
STOP. This procedure is complete.
To Next Page
Loading...
