Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
108 3FE-47429-AAAA-TCZZA Issue: 01
Procedure 35
1
S
e
l
e
c
t
Application > NTP from the top-level menu in the Ethernet Gateway window, as shown in
Figure 47.
Figure 47 NTP window
2 Select the Enable NTP Service checkbox.
3 Click Save.
4 STOP. This procedure is complete.
Procedure 36 UPnP and DLNA configuration
1 Select Application > UPnP and DLNA from the top-level menu in the Ethernet Gateway
window, as shown in Figure 48.
2
Configure DDNS.
3
Click Save.
4
STOP. This procedure is complete.
NTP configuration