Nokia Beacon 6 - Figure 44 Port Forwarding Window; Table 37 Port Forwarding Parameters

Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
104 3FE-47429-AAAA-TCZZA Issue: 01


1 Select Application > Port forwarding from the top-level menu in the Ethernet Gateway
window, as shown in Figure 44.

 Figure 44 Port forwarding window

Table 37 describes the fields in the port forwarding window.
 Table 37 Port forwarding parameters
Field Description
Application Name Choose an application name from the drop-down menu
WAN Port WAN port range
LAN Port LAN port range
Internal Client Choose a connected device from the drop-down menu and enter the
associated IP address

Protocol Choose the port forwarding protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Enable Mapping Select this checkbox to enable mapping
WAN Connection List Choose a WAN connection from the drop-down menu
Note—only active devices are shown on this menu
