Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
82 3FE-47429-AAAA-TCZZA Issue: 01
Figure 30 IP Routing window
Table 25 describes the fields in the IP Routing window.
Table 25 IP Routing parameters
Field Description
Enable Routing Select this checkbox to enable static routing
Destination IP Address Enter the destination IP address
Destination Netmask Enter the destination network mask
Gateway Enter the gateway address
IPv4 Interface Choose a WAN connection previously created in the WAN network window
from the drop-down menu
Forwarding Policy Choose a forwarding policy from the drop-down menu
2 Enter the routing information.
3 Click Add.
4 STOP. This procedure is complete.