Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
102 3FE-47429-AAAA-TCZZA Issue: 01
Procedure 31 Access control configuration
This procedure describes how to configure the access control level (ACL).
Note 1 — ACL takes precedence over the firewall policy.
Note 2 — The trusted network object will be shared for all WAN connections;
it is not applied individually to a WAN connection.
1 Select Security > Access Control from the top-level menu in the Ethernet Gateway window,
as shown in Figure 43.
Figure 43 Access Control window
Table 36 describes the fields in the Access Control window.
Table 36 Access control parameters
Field Description
To Next Page
Loading...
