Nokia Beacon 6 - Figure 9 Beacon 6 (HA-0336 G-A)

Nokia WiFi Beacon 6 Product Guide
3FE-47429-AAAA-TCZZA Issue: 01

 Figure 9 Beacon 6 (HA-0336G-A) connections

28231

3 Connect the Ethernet cables to the RJ-45 ports; see Figure 9 for the
location of the RJ-45 ports.


4 Connect the WAN cable to the RJ-45 WAN port; see Figure 9 for the
location of the RJ-45 WAN port.

Install a Beacon 6 (HA-0336G-A)

5 Connect the power cable to the power
connector.

Note — Observe the following:
• Units must be powered by a Listed or CE approved and marked
limited power source power supply with a minimum output rate of
12 V dc, 2 A. The polarity of the power adapter plug must match
the Beacon 6 (HA-0336G-A).


6 Power up the unit by using the On/Off power switch.
