Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
52 3FE-47429-AAAA-TCZZA Issue: 01
8 Configure a Beacon 6 (HA-0336G-A)
8.1 GUI configuration
8.1 GUI configuration
Use the procedures below to use the web-based GUI for the Beacon 6 (HA-0336G-A).
The Beacon 6 (HA-0336G-A) is used as an Ethernet gateway to connect devices in the home to
the Internet. The GUI provides a variety of features for the home network including routing and
firewall capability. By using the GUI, users can configure the right network connectivity for all
equipment in their home, including personal computers, set-top boxes, mobile phones, and other
consumer electronics devices, to the Internet.
Figure 11 shows the web-based GUI dashboard for the Beacon 6 (HA-0336G-A).
Multilingual support is available when device names are displayed in the dashboard.
Figure 11 Beacon 6 (HA-0336G-A) web-based GUI dashboard
Figure 12 shows the web-based GUI dashboard for the Beacon 6 (HA-0336G-A) with Bridge
mode in the network topology.
Figure 12 Beacon 6 (HA-0336G-A) web-based GUI dashboard—Bridge mode
To Next Page
Loading...
