Nokia WiFi Beacon 6 Product Guide ETSI CPE safety guidelines
Issue: 01 3FE-47429-AAAA-TCZZA 25
• EN 55032 (2015): Electromagnetic compatibility of multimedia equipment -
Emission Requirements
• EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
• Electromagnetic Compatibility (EMC) directive 2014/30/EU
• European Council Directive 2004/108/EC
• Low Voltage (LVD) directive 2014/35/EC
3.2.2 Equipment safety standard compliance
The Beacon 6 complies with the requirements of EN60950-1, Safety of Information
Technology Equipment for use in a restricted location.
3.2.3 Environmental standard compliance
The Beacon 6 complies with the EN 300 019 European environmental standards.
3.2.4 CE RED RF Radiation Exposure Statement
This device complies with CE RED radiation exposure limits set forth for an
uncontrolled environment. To comply with CE RED RF exposure compliance
requirements, this grant is applicable only for mobile configurations. The antennas
used for the transmitter must be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
3.2.5 Resistibility requirements compliance
The Beacon 6 complies with the requirements of ITU Recommendation K.21 for
resistibility of telecommunication equipment installed in customer premises to over
voltage and overcurrents.
To Next Page
Loading...
