Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
100 3FE-47429-AAAA-TCZZA Issue: 01
Table 34 Parental control parameters
Field Description
Policy Name Enter a name for the parental control policy or choose a policy from the list
Device The device for which the rule will apply
IP Enter the IPv4 address for the device or choose an IPv4 address from the list
URL Enter the URL for the device or choose a URL from the list
Days of week Choose Every Day, or Individual Days and select the checkboxes for the days of the
week for which the policy applies
From/To Enter the times for the policy to be in effect
Delete Click Delete to remove a policy from the list
Edit Click Edit to modify a policy in the list
Enable Click Enable to activate the policy
3 Click the plus sign (+) to add a policy.
A separate panel appears for configuring the policy name, IP address of the device, and dates and times for
the policy.
Procedure 30 DMZ and ALG configuration
1 Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window,
as shown in Figure 42.
Click Enable to activate the policy.
6
STOP. This procedure is complete.
To Next Page
Loading...
