Nokia Beacon 6 - Beacon 6 (HA-0336 G-A) Connections and Components

Beacon 6 (HA-0336W-B) unit data sheet Nokia WiFi Beacon 6 Product Guide
38 3FE-47429-AAAA-TCZZA Issue: 01

Table 7 Beacon 6 (HA-0336G-A) interface connection capacity
Device
type and
model 
Maximum
capacity
      
POTS 10/ 100
BASE-T
10/ 100/1000 
BASE-T
RF video
(CATV)
MoCA VDSL2 E1/T1 Local
craft
USB3.1(gen1)
Beacon 6 
(HA-0336G-
A)

— — 3 — — — — — 1
5.4.1 Beacon 6 (HA-0336G-A) connections and
components
Figure 7 shows the physical connections for Beacon 6 (HA-0336G-A).
 Figure 7 Beacon 6 (HA-0336G-A) physical connections

28231
Table 8 describes the physical connections for Beacon 6 (HA-0336G-A) devices.
 Table 8 Beacon 6 (HA-0336G-A) physical connections
Connection Description
On/Off button This button powers the unit on or off. 
WAN/LAN0 port This connection is provided through an RJ-45 Gigabit Ethernet interface. 
LAN 1/LAN 2 This connection is provided through Ethernet RJ-45 connectors. Up to three
10/100/1000 Base-T Ethernet interfaces are supported.The Ethernet ports can
support both data and in-band video services on all three interfaces.


WPS ON/Off button This button is used to start the WiFi Protected Setup (WPS) for new WiFi devices.
ON/OFF RESET
W
PS
LAN 1 LAN 2
W
AN
POWER
LAN 3
ON/OFF R ESET
W
PS
LAN 1 LAN 2
WAN
POWER
LAN 3