Need help?Do you have a question about the Nokia IP560 and is the answer not in the manual?
General| Brand | Nokia |
|---|---|
| Model | IP560 |
| Category | Security System |
| Language | English |
Describes the organization of the guide into chapters and appendices.
Lists other Nokia documentation and resources for the IP560 platform.
Explains warning, caution, and note types used in the guide.
Defines elements of commands and their syntax conventions.
Describes text formatting conventions like monospace, bold, italics.
Provides a general overview of the Nokia IP560 security platform and its capabilities.
Details the hardware overview of the Nokia IP560 security platform.
Describes the options for storing local system log files on the IP560.
Outlines environmental and safety requirements for the IP560 appliance.
Lists the operating system and application requirements for the IP560.
Provides guidelines for the environmentally friendly disposal of the appliance.
Lists necessary tools and precautions before installing the appliance.
Provides instructions for mounting the appliance in a standard 19-inch equipment rack.
Details manual initial configuration using a serial console connection.
Explains how to connect power and turn on the IP560 appliance.
Outlines the steps for performing the initial configuration process.
Describes how to connect network interfaces for management and traffic.
Explains how to use Network Voyager for management.
Describes how to use the IPSO command-line interface for management.
Introduces Nokia Horizon Manager for appliance management.
Explains how to deactivate NIC interfaces before removal or replacement.
Provides instructions for installing new network interface cards.
Lists requirements for installing a Nokia NIC.
Describes how to configure and activate interfaces on a new NIC.
Explains how to monitor the status of network interface cards.
Details the four-port 10/100 Ethernet NIC features and connections.
Lists the features of the four-port 10/100 Ethernet NIC.
Describes connectors and cables for Ethernet NICs.
Details copper Gigabit Ethernet NICs and their features.
Lists features of copper Gigabit Ethernet NICs in the IP560.
Describes the two-port fiber-optic Gigabit Ethernet NIC.
Lists features of the MMF fiber-optic Gigabit Ethernet NIC.
Describes connectors and cables for fiber-optic NICs.
Explains variables stored in boot manager nonvolatile memory.
Shows how to view boot manager variables using printenv.
Describes commands like setenv and unsetenv for managing variables.
Explains how to boot the Nokia IPSO operating system using the boot command.
Details how to install Nokia IPSO using the install command.
Explains how to set a password for the boot manager.
Provides instructions for installing the boot manager.
Details the process for upgrading the boot manager.
Provides solutions for common issues like login, password, and console connection problems.
Addresses Ethernet connectivity issues, including link lights, speed, and port status.
Solves problems with pinging, interfaces, routes, ARP, and multicast.
Troubleshoots power reception and memory configuration detection problems.
Covers replacing Compact Flash and Hard-Disk Drives.
Explains installation and usage of PC cards for logging.
Details upgrading or replacing DIMM memory modules.
Covers replacing the Encryption Accelerator, Fan Unit, and Power Supply.
Explains how to replace the internal battery.
Lists physical dimensions of the IP560 appliance.
Specifies the operating temperature and humidity range.
Details the rack space requirements for the IP560 appliance.
Declares conformity to ISO/IEC and EN standards.
Lists hardware compliance with various industry standards.
Provides FCC compliance information for the device.
To Next Page
