Nokia IP560 - Setting the Variables; Setenv

6 Using the Boot Manager
84 IP560 Security Platform Installation Guide
ls
Use the ls command to view the contents of directories on the devices in your
IP560. The command has the following syntax:
ls device directory
where device is the device that contains the directory you want to look at, and
directory is the directory on that device. Both device and directory are
optional. The default directory is /image on the wd0 device.
For example:
BOOTMGR[2]> ls wd0 /image/current
.description bootmgr etc kernel.debug usr
VERSION cdrom ipso.tgz mnt web
bin dev kernel sbin
Setting the Variables
setenv
Use the setenv command to set a particular variable. The command has the
following syntax:
setenv name value
where name is the name of the variable, and value is the new value you want
the variable to assume.
For example:
BOOTMGR[2]> setenv autoboot YES
sets the value of autoboot to YES.