Nokia IP560 - Troubleshooting Routing Problems

Troubleshooting Routing Problems
IP560 Security Platform Installation Guide 103
For example:
BOOTMGR[11]>printenv
NOKIAIPSOBOOTMGRVERSION=4.0.1-DEV00110.18.2005-115113
autoboot:YES
testboot:NO
bootwait:3
boot-file:/image/current/kernel
boot-flags:
boot-device:wd0
vendor:Nokia
model:IP
bmslice:1
BOOTMGR[12]>
Troubleshooting Routing Problems
Several useful tools are available to troubleshoot routing problems. The first
tool is available from the Monitor page in Network Voyager, from which you
display routing statistics and errors. You can access this information from the
command-line interface using the ICLID (IPSRD command-line interface
daemon) command. An example use of the ICLID command is shown below.
For information about the ICLID command, see the Nokia Network Voyager
Reference Guide. For information about how to access Network Voyager and
the related reference materials, see “Accessing Nokia Network Voyager
Reference Information” on page 53.