Nokia IP560 - Using Nokia Horizon Manager

Using Nokia Horizon Manager
IP560 Security Platform Installation Guide 55
management commands section in the CLI Reference Guide for the
version of IPSO you are using.
2. If you log in as a monitor user, you can execute only the show form of
commands. That is, you can view configuration settings, but you cannot
change them.
You can now execute CLI commands from the CLI shell and the IPSO shell.
The IPSO shell is what you see when you initially log on to the platform.
For more information about how to access and use the CLI, see the Nokia CLI
Reference Guide for the version of IPSO you are using.
Using Nokia Horizon Manager
Nokia Horizon Manager is an extension of the Network Voyager management
functionality.
While Network Voyager provides the device administrator access to network
configuration tasks (such as interface configuration and routing configuration)
Execute from To implement Purpose
IPSO command
line
Enter the following command to
invoke the CLI shell:
clish
The prompt changes, and you
can then enter CLI commands.
Enter any CLI commands in an
interactive mode with help text
and other helpful CLI features.
IPSO command
line
Enter
clish -c
“cli-command”
Execute a single CLI command.
You must place
double-quotation marks
around the CLI command.
Command files From inside the CLI shell, enter
load commands
filename
Load commands from a text file
that contains commands. The
argument must be the name of
a regular file.