1 Overview
32 IP560 Security Platform Installation Guide
The power supply status LEDs provide the status of the power supply as
described in Table 6.
Fan Unit
The IP560 fan is a single unit made up of four individual fans to provide the
air flow required to maintain a proper operating temperature. The fan unit can
provide proper airflow for a short time even if an individual fan fails.
Table 6 Power Supply Status LEDs
LED LED status Meaning
Fault Red Power supply has a voltage problem
and power was turned off.
or
One power supply in a redundant
system is not turned on.
Over Temp Yellow Power supply has an internal
temperature problem. All power to the
unit is turned off. After the internal
temperature returns to normal, power
will be turned back on.
PWR OK Green Power is on and the power supply is
functioning properly.
To Next Page
Loading...
