Nokia IP560 - Setalias; Unsetalias

6 Using the Boot Manager
86 IP560 Security Platform Installation Guide
For example:
BOOTMGR[2]> set-defaults autoboot
sets the value of autoboot to YES, the factory default.
setalias
Use the setalias command to set an alias. The command has the following
syntax:
setalias name device
where name is the alias name, and device the device for which name is the
alias.
For example:
BOOTMGR[2]> setalias disk wd0
sets the alias disk to the value of wd0.
You can have a maximum of eight aliases set at one time.
unsetalias
Use the unsetalias command to clear an alias. The command has the following
syntax:
unsetalias name
where name is the name of the alias to be cleared.
For example, the following command deletes the
disk alias from the list of
aliases:
BOOTMGR[2]> unsetalias disk