Nokia IP560 - Figure 16 Four-Port Copper Gigabit Ethernet NIC Front Panel

5 Connecting PMC Network Interface Cards
72 IP560 Security Platform Installation Guide
 Link speed auto advertising (10/100/1000)
 PCI operation at 133 MHz on the IP560
 Compliance with IEEE 802.3ab Gigabit Ethernet specifications
 Cable autosensing
The copper Gigabit NICs in the IP560 run on Nokia IPSO v4.0.1 or higher.
You can configure and monitor Gigabit Ethernet NIC interfaces with Nokia
Network Voyager. Specifically, you can use Network Voyager to set the port
speed and full-duplex mode to 1000, 100, or 10 Mbps.
For information about how to access Network Voyager and the related
reference materials, see “Accessing Nokia Network Voyager Reference
Information” on page 53.
Figure 16 Four-Port Copper Gigabit Ethernet NIC Front Panel Details
00026.3
321
1
2
3
4
4
1000 BaseT
Activity LED (blinking green)
Link LED (solid green)
Ports
RJ-45 connectors