EasyManua.ls Logo

Nokia IP560 - Rack-Mounting the Appliance; Figure 10 Rack-Mounting Screw Locations

Nokia IP560
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 Installing the Nokia IP560 Appliance
38 IP560 Security Platform Installation Guide
Rack-Mounting the Appliance
The Nokia IP560 security platform mounts in a standard 19-inch equipment
rack with four mounting screws, as Figure 10 shows.
Note
To avoid damaging your equipment, Nokia recommends that you use all
four rack-mounting bolts when you install your appliance on the rack.
Figure 10 Rack-Mounting Screw Locations
Two rack-mounting positions allow you to mount the appliance either flush
with the rack, or two inches forward of the equipment rack. If the space
behind the rack is insufficient, the rack-mounting brackets can be attached
further back on the side of the appliance.
Caution
During installation, do not block any ventilation openings. Doing so
might result in damage to the appliance when it is turned on.
0035
4
SLOT 1 SLOT 2 SLOT 3 SLOT 4
1
2
3
4
IP560
Rack-mounting screw locations

Table of Contents

Related product manuals