Nokia WiFi Beacon 6 Product Guide Configure a Beacon 6 (HA-0336W-B)
Issue: 01 3FE-47429-AAAA-TCZZA 69
Static DHCP
MAC Address Hexadecimal MAC address to associate to the LAN
IPv4 Address IP address to associate to the bound MAC address
2 Configure the LAN.
3 Click Save.
4 Bind a MAC address to the LAN by entering the MAC and IP addresses in the Static DHCP Entry fields and then
clicking Add. Repeat for all MAC addresses to be bound.
Procedure 14 LAN IPv6 networking configuration
1 Select Network > LAN_IPv6 from the top-level menu in the Ethernet Gateway window, as shown
in Figure 23.
Figure 23 LAN IPv6 network window
Table 19 describes the fields in the LAN IPv6 network window.
To Next Page
Loading...
