Configure a Beacon 6 (HA-0336W-B) Nokia WiFi Beacon 6 Product Guide
70 3FE-47429-AAAA-TCZZA Issue: 01
Table 19 LAN IPv6 network parameters
Field Description
IPv6 LAN Host Configuration
DNS Server Choose a DNS server from the drop-down menu
Prefix Config Choose a prefix config option from the drop-down menu, either
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
Prefix This field appears if you selected the “Static” option for the “prefix config” field.
Type a connection.
Interface This field appears if you selected the Wan Connection option for the “prefix
config” field. Choose a WAN connection interface from the drop-down menu.
DHCPv6 Server Pool
DHCP Start IP Address Enter the starting DHCP IP address
DHCP End IP Address Enter the ending DHCP IP address
(1 of 2)
Field Description
Whether the address info
through DCHP
Select this checkbox to enable address information retrieval through DHCP
Whether other info obtained
through DHCP
Select this checkbox to enable retrieval of other information through DHCP
Maximum interval for
periodic RA messages
Enter the maximum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
Minimum interval for periodic
RA messages
Enter the minimum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
(2 of 2)
2 Choose a DNS server, Prefix Config, and Interface.
3 Enter the DHCP configuration information.
4 Enter the maximum and minimum intervals for RA messages.
5 Click Save/Apply.
6 STOP. This procedure is complete.
To Next Page
Loading...
