Nokia 6010 User Guide 33 Copyright © 2004 Nokia
Contacts
Switch between memory types
The default memory type is Phone and SIM.
Select Contacts > Settings > Memory in use > Phone and SIM, Phone, or SIM card.
If you choose to keep Phone and SIM as the memory type:
• Contacts names and numbers can be recalled from both the phone and SIM card
• Contacts entries are displayed in a combined list
• New entries are saved to the phone memory.
Check Contacts memory status
Select Contacts > Settings > Memory status > Phone or SIM card.
If your list in Contacts is full, you can save the phone number to another memory
or replace an existing entry.
• DELETE NAMES AND NUMBERS
Number
1 At the start screen, press the Up scroll or the Down scroll key to scroll to the
entry you want to delete.
2 Select Details > Options
> Delete number > OK.
Name and number
1 At the start screen, press the Up scroll key or the Down scroll key to scroll
through Contacts until you find the entry you want to delete.
2 Select Details > Options
> Delete > OK.
Entire Contacts contents
Warning: This feature deletes the entire contents of Contacts and cannot
be undone. Some repair services for your phone may erase your contact list
entries. Be sure to make a copy of all information before requesting any
repair service.
1 Select Contacts > Delete > Delete all > Phone or SIM card > Delete > OK.
2 Enter your security code and select OK. See “Security code” on page 64 for the
default code.
To Next Page
Loading...
