Nokia 6060 - Certificates

Web
74 Copyright © 2005 Nokia. All rights reserved
Change module PIN — to change the module PIN, if allowed by the
security module. Enter the current module PIN code, then enter the new
code twice.
Change signing PIN — to change the signing PIN code for the digital
signature. Select the signing PIN you want to change. Enter the current
PIN code, then enter the new code twice.
See also "Access codes", p. xi.
Certificates
Important: Note that even if the use of certificates makes the
risks involved in remote connections and software installation
considerably smaller, they must be used correctly in order to
benefit from increased security. The existence of a certificate
does not offer any protection by itself; the certificate manager
must contain correct, authentic, or trusted certificates for
increased security to be available. Certificates have a restricted
lifetime. If Expired certificate or Certificate not valid yet is shown
even if the certificate should be valid, check that the current date
and time in your device are correct.
Before changing any certificate settings, you must make sure that you
really trust the owner of the certificate and that the certificate really
belongs to the listed owner.