Nokia 6111 - Call

82Copyright © 2006 Nokia. All rights reserved.
To activate the phone for data transfer or picture printing, connect the data cable;
when the phone displays USB data cable connected. Select mode., select OK.
Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print pictures directly from the phone using a compatible printer
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable > Default mode, or Printing.
■ Call
Select Menu > Settings > Call and from the following options:
Call divert (network service) — to divert your incoming calls. You may not be able
to divert your call, if some call barring functions are active. See Call barring service
in Security p. 86.
Anykey answer > On — to answer an incoming call, briefly press any key, except
the end key, the camera release key and the left and right selection keys
Automatic redial > On — to set your phone to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt
Speed dialling > On — to activate speed dialing. To set up speed dialing, see Speed
dials’ p. 66. To dial, press and hold the corresponding number key.
Call waiting > Activate — to set the network to notify you of an incoming call
while you have a call in progress (network service). See Call waiting p. 32.