Settings
59 Copyright © 2006 Nokia. All rights reserved.
Security level > Phone — the phone
asks for the security code whenever
a new SIM card is inserted into the
phone. Select Memory and the
phone asks for the security code
when SIM card memory is selected
and you want to change the memory
in use.
Access codes — to set the PIN code
or UPIN code in use, or to change the
security code, PIN code, UPIN code,
PIN2 code, and barring password
Code in use — to select whether the
PIN code or UPIN code should be
active
Pin2 code request — to select
whether PIN2 code is required when
using a specific phone feature which
is covered by the PIN2 code (depends
on SIM card)
Authority certificates and User
certificates — to view the list of the
authority and user certificates
downloaded into your phone.
See ”Certificates” p. 86.
Security module settings — See
”Security module” p. 85.
■ Restore factory
settings
To reset some of the menu settings
to their original values, select
Menu > Settings > Restore factory
sett.. Enter the security code. The
data you have entered or
downloaded are not deleted, for
example, the names and phone
numbers saved in Contacts.
Nokia_6111_China_UG_HKEN.fm Page 59 Thursday, October 25, 2007 2:54 PM
To Next Page
Loading...
