Nokia 6160 6160 - Making Calling Card Calls

29
For details about your phone’s security code, see “Security
code” on page 60.
*These calling cards are frequently used with these dialing
sequences. However, they may vary and are subject to change
at the phone company’s discretion.
Choosing a calling card to use
1.
Press
Menu
4 1 3 (
Settings
-
Call settings
-
Calling
card
)
2.
Scroll to desired card and press
Options
3.
Press
W
or
V
to highlight
Select
and press
OK
.
4.
Enter security code at
Security code:
, press
OK
5.
Your phone will display
Card ready for use
Making calling card calls
1.
Enter the phone number, including any prefix (such
as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card
for instructions.
2.
Press and hold
ó
for a few seconds until your
phone displays
Card call
.
Dialing
Sequence
Use for cards that
require you to:
Cards
using this
sequence*
Access no.
+ phone no.
+ card no.
Dial 1-800 access number,
then phone number, then card
number (+ PIN if required)
MCI, AT&T True
Choice, Sprint
Canada, Unitel
Access no.
+ card no.
+ phone no.
Dial 1-800 access number,
then card number (+ PIN if
required), then phone number
networkMCI,
WorldPhone MCI
Prefix
+ phone no.
+ card no.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number, (then PIN, if required)
GTE, PacBell,
AT&T, Stentor