67
Storing touch tone strings with phone numbers
1.
Enter the phone number (e.g. your office voice
mailbox)
2.
Press
∗∗∗
(p) or
∗∗∗∗
(w)
3.
Enter the touch tone string (e.g. voice mailbox
password)
4.
Store the number as you normally would
Note: See “Special Characters (for storing numbers)” on
page 37 for details on “p” and “w” characters.
When you dial this number, your phone first dials the
phone number, then waits (because of the “w”
character) for you to press
Send
. Your phone then
sends your password.
If you include a “p” character instead of a “w”, your
phone pauses for 2.5 seconds, then automatically
sends your password as touch tones.
Touch tone length
This feature determines the length of each touch tone
when they are sent automatically.
Short
sets the tone length to .1 second.
Long
sets the
tone length to .5 second.
You can set the touch tone length by pressing
Menu
4 2 3 2 (
Settings
-
Phone settings
-
Touch tones
-
Touch
tone length
).
Unlocked phone number
When the phone lock is on (
see page 51
), no calls can
be made. However, you can store one number into your
phone that can be called when it’s locked.
Storing the unlocked phone number
1.
Press
Menu
4 3 2 2 (
Settings
-
Security settings
-
Access codes
-
Unlocked phone number
)
2.
Enter lock code and press
OK
To Next Page
Loading...
