Nokia 6200 - Activate Call Waiting

[ 90 ]
Activate/deactivate automatic redial
Occasionally, your network may experience heavy traffic, resulting in a
fast, busy signal when you dial. With automatic redial activated, your
phone redials the number up to 10 times, and notifies you once the
network becomes available.
1
At the Start screen, press
Menu 4-3-3
(
Settings > Call settings >
Automatic redial
). After a brief pause,
On
and
Off
appear in the display.
2
Scroll to
On
(or
Off
to deactivate) and press
Select
.
Activate/deactivate 1-touch dialing
1-touch dialing must be activated before you can make calls using this
method. For information on assigning keys to 1-touch dialing and using
1-touch dialing, see “1-touch dialing” on page 47.
1
At the Start screen press,
Menu 4-3-4
(
Settings > Call settings >
1-touch dialing
). After a brief pause,
On
and
Off
appear in the display.
2
Scroll to
On
(or
Off
to deactivate) and press
Select
.
Activate call waiting
If supported by your wireless provider, call waiting notifies you of an
incoming call even while you are in a call. You can then accept, reject, or
ignore the incoming call.
ACTIVATE CALL WAITING
1
At the Start screen, press
Menu 4-3-5
(
Settings > Call settings >
Call waiting
) and press
Select
. After a brief pause,
Activate
,
Cancel
,
and
Check status
appear in the display.
2
Scroll to
Activate
and press
Select
.
USE CALL WAITING
• During a call, press
h
to answer the waiting call. The first call is put
on hold.
•Press i
to end the active call.