6210 Navigator RM-367, RM-386, RM-408, RM-419
Service Manual Level 1&2
ISSUE 1
Confidential
23
11. ASSEMBLY HINTS
1) Tighten the screws to the torque of 17 Ncm in
the order shown.
2) Tighten the screws to the torque of 17 Ncm in
the order shown.
3) Tighten the screws to the torque of 12 Ncm.
The order of 7 and 8 can be chosen freely.
11.1 Assembling the Alpha Keymat
1. Start with the hooks on upper side.
2. Then, press the right and left side snaps carefully (by sliding a little) in place one by one.
3. Press the lower right side snap in place (by sliding a little) and be careful not to damage the snap.
4. Continue with the left side snap by pressing keyboard so that you can hear a snapping sound.
5. Press the keymat with fingers for a few seconds (minimum of 3 seconds) to activate the glue.
Copyright @ 2008 NOKIA. All rights reserved
To Next Page
Loading...
