72
Connectivity
For availability, costs and subscribtion to the service, contact your service
provider. Note that roaming services may be more limited than home network
services.
Before you can use the PTT service, you must define the PTT connection settings.
For PTT service settings, contact your service provider.
Phone calls always take priority over PTT calls.
Select > Applications > PTT.
Log in to PTT
To log in manually, select Options > Log in to PTT.
indicates a PTT connection.
indicates that PTT is set to do not disturb (DND).
Exit PTT
Select Options > Exit. Log out from PTT after exiting application? is displayed. To
log out, select Yes. To keep PTT active in the background, select No.
Make a one-to-one call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
1. Select Options > PTT contacts > Contacts, scroll to the contact you want to
talk to, and press the call key.
2. When the connection has been established, to talk to the other participant,
press and hold the call key while you talk.
3. To end the PTT call, select Disconnect, or, if there are several PTT calls, select
Options > Disconnect.
Make a PTT group call
To call a group, select Options > PTT contacts > Contacts > Options > Talk to
many, mark the contacts you want to call, and select OK.
PTT sessions
PTT sessions are displayed as call bubbles in the PTT display, giving information
about the status of the PTT sessions:
Wait — shown when you press and hold the call key and somebody else is still
speaking in the PTT session
To Next Page
Loading...
