Synchronize from a server
To use a remote internet server, subscribe to a synchronization service. For
more information and the settings required for this service, contact your service
provider. You may receive the settings as a configuration message. See
"Configuration setting service," p. 12.
1. To start the synchronization from your device, select Menu > Settings >
Connectivity > Data transfer > Server sync.
2. Depending on the settings, select Initialising synchronisation or
Initialising copy.
Synchronizing for the first time or after an interrupted synchronization may
take up to 30 minutes to complete.
USB data cable
You can use the USB data cable to transfer data between the device and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the device for data transfer or image printing, connect the data
cable. Confirm "USB data cable connected. Select mode." and select from the
following options:
• Nokia mode — to use the cable for PC Suite
• Printing & media — to use the device with a PictBridge compatible printer
or with your compatible PC
• Data storage — to connect to a PC that does not have Nokia software and
use the device as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB data
cable and the desired USB mode.
Call
Select Menu > Settings > Call and from the following options:
Settings
56
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-E1544AC5-7061-4AE9-A1A4-A210498F82B9.en.200612151012394681166171164375/en/1/GUID-7C1BD2F4-DE90-4CA6-8F0C-
D6CE2FEB7F7D.xml Page 56 Dec 15, 2006 10:26:38 AM
To Next Page
Loading...
