12
[ 80 ]
Create and use voice commands
To create a voice command:
1 Press Menu 12-2 (Extras - Voice commands).
2 Select the command folder you want from the following:
•Profiles
• Voice mailbox
• Infrared
• Recorder
• Call log
3 Once you have selected the desired folder above, scroll to the
command (some folders contain only one option) to which you want
to add a voice tag.
4 Press Options then select Add command.
If the command already has a voice tag, the indicator is shown. If
the voice tag memory is full, you will be prompted to erase an existing
command before you can record another.
5 Press Start and speak the command clearly. The command will play
back and will appear next to the command name.
To activate a voice command:
1 Make sure the phone is in idle mode.
2 Press and hold Names.
OR
3 Press and hold the volume down key.
4 Speak the command when prompted.
Note: When an application using the GPRS connection is sending
or receiving data, you cannot activate a voice command. To use a
voice command, you must first terminate the GPRS connection.
To Next Page
Loading...
