50
■ Timer
1. Select Menu > My Stuff > Tools > Timer > Normal timer. Enter the alarm time 
in hours, minutes, and seconds, and select OK.
You can enter your own note text, which is displayed when the time expires.
2. To start the timer, select Start. 
3. To change the countdown time, select Change time.
4. To stop the timer, select Stop timer.
If the alarm time is reached when the phone is in the standby mode, the phone 
sounds a tone and flashes the note text (if it is set) or Countdown completed. 
To stop the alarm press any key. If no key is pressed, the alarm automatically stops 
within 60 seconds. To stop the alarm and to delete the note text, select Exit. 
To restart the countdown timer, select Restart.
■
Stopwatch
Select Menu > My Stuff > Tools > Stopwatch to measure time, take intermediate 
times, or take lap times using the stopwatch. During timing, the other functions of 
the phone can be used. To set the stopwatch timing in the background, press the 
end key.
Using the stopwatch or allowing it to run in the background when using other 
features increases the demand on battery power and reduces the battery life.
18. Settings
■ Set profiles
Your phone has various settings groups called profiles, for which you can 
customize the phone tones for different events and environments.
Select Menu > Settings > Set profile, the desired profile, and from the following:
Activate — to activate the selected profile
Customize — to customize the profile. Select the setting you want to change, and 
make the changes. 
Timed — to set the profile to be active until a specified time, up to 24 hours, and 
set the end time. When the time set for the profile expires, the previous profile 
that was not timed becomes active.