Copyright © 2004 Nokia. All rights reserved.
41
Adding a ringing tone for a contact card or group
You can set a ringing tone for each contact card and group. When that contact or
group member calls you, the phone plays the chosen ringing tone (if the caller’s
telephone number is sent with the call and your phone recognises it).
1. Press to open a contact card or go to the Groups list and select a contact
group.
2. Select Options→ Ringing tone. A list of ringing tones opens.
3. Use the joystick to select the ringing tone you wish to use for the contact or
group and press Select.
• To remove the ringing tone, select Default tone from the list of ringing tones.
Note: For an individual contact, the phone will always use the ringing tone
that was assigned last. So, if you first change a group ringing tone and then the
ringing tone of a single contact that belongs to that group, the ringing tone of the
single contact will be used when the contact calls you the next time.
Managing contact groups
You can create contact groups, which can, for example, be used as distribution
lists for sending text messages and e-mail. A ringing tone may be added to a
group. See ‘Adding a ringing tone for a contact card or group’, p. 41.
Options in the Groups list view: Open, New group, Delete, Rename, Ringing
tone, Contacts info, Settings, Help, and Exit.
To Next Page
Loading...
