Nokia 6700 slide - Page 23

Nokia 6700 Slide
RM-576 / RM-577
Service Manual Level 1&2
23 Confidential | Copyright © 2010 Nokia | All rights reserved Version 2.0
6) Carefully press down the UI KEYMAT SUPPORT so
that the adhesive on the MAIN FLEX ASSEMBLY
activates.
7) Remove the MAINFLEX ASSEMBLY with the UI
KEYMAT SUPPORT. Assembling of the UI KEYMAT
SUPPORT to the MAIN FLEX ASSEMBLY is now
complete.
Prebending of the LCD flex
1) Open the locking mechanism of the LCD
connector on the MAIN FLEX ASSEMBLY with the SS-
93.
2) Connect the LCD connector to the MAIN FLEX
ASSEMBLY. Close the locking mechanism with the
SS-93.
3) Turn over the LCD.