Write text
Traditional text input
is shown on the top right of the
display when you are writing text
using traditional text input.
and indicate the selected
case.
indicates that the first
letter of the sentence is written in
uppercase and all the other letters are
automatically written in lowercase.
indicates the number mode.
To write text with the keypad, press a
number key 2-9 repeatedly until the
desired character appears. There are
more characters available for a
number key than are printed on the
key. If the next letter is located on the
same key as the present one, wait until
the cursor appears, and enter the
letter.
To insert a number, press and hold the
number key.
To switch between the upper and
lower case mode and the number
mode, press #.
To erase a character, press the clear
key. Press and hold the clear key to
erase more than one character.
To access the most common
punctuation marks, press the 1 key.
Press 1 repeatedly to reach the desired
punctuation mark.
To add special characters, press *.
Scroll to the desired character and
press the scroll key.
To insert a space, press 0. To move the
cursor to the next line, press 0 three
times.
To switch between the different
character cases, press #.
Predictive text input
1 To activate or deactivate
predictive text input, press # twice
quickly. This activates or
deactivates predictive text input
for all editors in the device.
indicates that predictive
text input is activated.
2 To write the desired word, press
the keys 2-9. Press each key once
for each letter.
3 When you have finished writing
the word, and it is correct, scroll
right to confirm it, or press 0 to
add a space.
If the word is not correct, press *
repeatedly to view the matching
words in the dictionary.
If the ? character is displayed after
the word, the word you intended
to write is not in the dictionary. To
add a word to the dictionary,
select Spell, enter the word (up to
32 letters) using traditional text
input, and select OK. The word is
added to the dictionary. When the
dictionary is full, the new word
replaces the oldest added word.
Write the first part of a compound
word; to confirm it, scroll right. Write
the second part of the compound
word. To complete the compound
word, press 0 to add a space.
Write text 31
www.nokia.com/support
Cyan
Magenta
Yellow
Black
© 2009 Nokia. All rights reserved.