Write text
Traditional text input
is shown on the top righ
t of the display when you
are writing text using traditional text input.
and
indicate the selected case.
indicates that the first letter of the sentence is written
in uppercase and all the other letters are automatica
lly
written in lowercase.
indicates the number
mode.
To write text with the ke
ypad, press a number key
2-9 repeatedly until the desired character appears.
There are more characters available for a number key
than are printed on the key. If
the next letter is located
on the same key as the pr
esent one, wait until the
cursor appears, and enter the letter.
To insert a number, press
and hold the number key.
To switch between the uppe
r and lower case mode and
the number mode, press
#.
To erase a character, press
the clear key. Press and hold
the clear key to erase more than one character.
To erase a character, press
the backspace key. Press and
hold the backspace key to erase more than one
character.
To access the most common punctuation marks, p
ress
the
1 key. Press
1 repeatedly to reach the desired
punctuation mark.
To add special characters, press
*. Scroll to the desired
character and press the scroll key.
To insert a space, press
0. To move the cursor to the
next line, press
0 three times.
To switch between the different character cases, press
#.
Predictive text input
1. To activate predictive text input, press
# twice
quickly. This activates predictive text input for all
editors in the device. The indicator
is shown
on the display.
2. To write the desired word, press
2-9. Press each key
only once for one letter.
3. When you have finished
writing the word and it is
correct, scroll right to confirm it, or press
0 to add
a space.
If the word is not correct, press
* repeatedly to view
the matching words the dictionary has found.
If the ? character is shown after the word, the word
you intended to write is
not in the dictionary. To
add a word to the dictionary, select
Spell, enter the
word (up to 32 letters) us
ing traditional text input,
and select
OK. The word is adde
d to the dictionary.
When the dictionary is fu
ll, the new word replaces
the oldest added word.
32
Write text
Cyan
To Next Page
Loading...
