Nokia 6760 slide - Your Nokia 6760 slide; Phone setup

Nokia 6790 Surge / Nokia 6790 Slide / Nokia 6760 Slide
RM-492 / RM-599 / RM-573
Service Manual Level 1&2
18
Confidential
 Copyright © 2009 NOKIA  All rights reserved
Version 1.0 ISSUE 1
11. ASSEMBLY HINTS
1) When assembling the 2UA_05A UI MODULE be
careful not to damage the connector.
2) Activate the adhesive on the SLIDE ASSEMBLY by
pressing the flex with the SS-93 as shown. Maintain
the pressure for 5 seconds.
3) Tighten the two Phillips size 00 screws to the
torque of 9 Ncm.
4) Move the slide to the opposite position. Tighten
the two Phillips size 00 screws to the torque of 9
Ncm.
5) When placing the LIGHT SWAP PWB, rotate it
clockwise so that the connector goes easily through
the hole.
6) Make sure that the engine board is placed
correctly and then connect the connector of the
2UA_05A UI MODULE.