● The security code helps to protect your device against unauthorised use. The preset
code is 12345. You can change the code and set the device to request the code. Some
operations require the security code regardless of the settings, for example, if you
want to restore the factory settings. Keep the code secret and in a safe place separate
from your device. If you forget the code and your device is locked, your device will
require service and additional charges may apply. For more information, contact a
Nokia Care point or your device dealer.
● The PIN (UPIN) code, supplied with the SIM (USIM) card, helps to protect the card
against unauthorised use.
● The PIN2 (UPIN2) code, supplied with some SIM (USIM) cards, is required to access
certain services.
● PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with the SIM (USIM) card. If you
enter the PIN code incorrectly three times in succession, you are asked for the PUK
code. If the codes are not supplied, contact your service provider.
● The barring password is required when using the call barring service to restrict calls
to and from your device (network service).
● To view or change the security module settings for the browser, select Menu >
Settings and Security > Security module.
Switch the device on and off
Switch on and off — Press and hold the power key.
Enter the PIN code — If requested , enter the code PIN code (displayed as
****).
Set the time and date — If requested, enter the time and date.
When you switch on your device for the first time, you may be prompted to get the
configuration settings from your service provider (network service). For more
information, contact your service provider.
Home screen
When the device is ready for use, and you have not entered any characters, the device
is in the home screen.
Switch it on
12 www.nokia.com/support
Cyan
To Next Page
Loading...
Need help?
General
