Nokia 7210 SAS-M Configuration Guide

Ethernet Ring Commands
Page 226 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Ethernet Ring Commands
eth-ring
Syntax eth-ring ring-id
no eth-ring
Context config
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command configures a G.8032 protected Ethernet ring. G.8032 Rings may be configured as major rings
with two paths (a&b).
The no form of this command deletes the Ethernet ring specified by the ring-id.
Default no eth-ring
Parameters ring-id — Specifies the ring ID.
Values 1—128
description
Syntax description description-string
no description
Context config>eth-ring
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command adds a text description for the ring. The no form of this command removes the text
description.
Default “Eth ring”
Parameters string — Specifies the text description up to 160 characters in length.
guard-time
Syntax guard-time time
no guard-time
Context config>eth-ring
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English