Nokia
User Guide
Copyright © 2004 Nokia
Messages
2 When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have set up voice mail, you can dial the number in the following ways:
• Dial the voice mailbox number using the keypad.
• Press and hold 1.
•Select Listen if there is a notification message in the display.
After a brief pause, your phone dials the voice mail number. Once you connect
and the prerecorded greeting begins, follow the automated instructions to
listen to your voice messages.
• Info message service
With the info message network service, you can receive short text messages
from your service provider on various topics, such as weather and traffic
conditions. Contact your service provider for more information.
Select Menu > Messages > Info messages and follow the prompts to configure
you service.
Info service—Select On or Off to activate or deactivate the service, or Topic
index to activate index reception.
Note: If the GPRS connection is set to Always online, info messages
may not be received. In that case, set the GPRS connection to When
needed. See “GPRS, EDGE, CSD, HSCSD” on page 52 for more
information.
• Service commands
Use the Service commands editor to enter and send service requests (also
known as USSD commands) to your service provider. Contact your service
provider for information about specific service commands.
1 Select Menu > Messages > Service commands.
2 Enter a service request, such as an activation command for a specific
network service, and select Send.
To Next Page
Loading...
