52 Copyright © 2004 Nokia
For information on using a data communication application, refer to the
documentation provided with the application.
For more information on Nokia PC Suite applications, see the Nokia PC Suite online
help. Nokia PC Suite and all related software can be downloaded from
www.nokia.com/us.
Infrared
You can send or receive data such as business cards, graphics, images, sound
clips, videos, and calendar notes to or from a compatible phone or data device
(such as a computer) using the IR port of your phone.
For better performance during an IR connection, place the phone on a
stationary surface. Do not move the phone while the IR connection is active.
The preferable distance between the two devices in an IR connection is from 3
inches to 3 feet.
Do not point the IR beam at anyone’s eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
SEND AND RECEIVE DATA
1 Ensure that the IR ports of the sending and receiving devices are pointing
at each other and that there are no obstructions between the devices.
2 To activate IR in your phone, select Menu > Settings > Connectivity >
Infrared from the menus.
3 The user of the other device should activate IR as well.
If data transfer is not started within 2 minutes after the activation of the IR
port, the connection is canceled and must be restarted.
CONNECTION INDICATOR
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device or a
connection has been lost.
GPRS, EDGE, CSD, HSCSD
With your phone you can use general packet radio service (GPRS), high-speed
circuit switched data (HSCSD), and circuit switched data (CSD). The use of
HSCSD services consumes the battery faster than normal voice or data calls.
You may need to connect the phone to a charger during HSCSD data transfer.
To Next Page
Loading...
