Call functions
23
3. Call functions
■ Make a call
1. Enter the phone number, including the area code.
For international calls, press * twice for the international prefix (the
+ character replaces the international access code), enter the
country code, the area code without the leading 0, if necessary, and
the phone number.
2. To call the number, press the call key.
3. To end the call or to cancel the call attempt, press the end key.
To search for a name or phone number that you have saved in Contacts,
see Search for a contact p. 46. Press the call key to call the number.
To access the list of dialled numbers, press the call key once in the
standby mode. To call the number, select a number or name, and press
the call key.
Speed dialling
Assign a phone number to one of the speed-dialling keys, 2 to 9. See
Speed dials p. 51. Call the number in either of the following ways:
• Press a speed-dialling key, then the call key.
•If Speed dialling is set to On, press and hold a speed-dialling key until
the call begins. See Speed dialling in Call p. 62.
Enhanced voice dialling
You can make a phone call by saying the name that is saved in the
contact list of the phone. A voice command is added automatically to all
entries in the contact list of the phone.
If an application is sending or receiving data using a packet data
connection, end the application before you use voice dialling.
Voice commands are language-dependent. To set the language, see
Voice playback language in Phone p. 63.
To Next Page
Loading...
