Messaging
36
■ E-mail application
The e-mail application uses a packet data connection (network service)
to allow you to access your e-mail account. This e-mail application is
different from the SMS e-mail function. To use the e-mail function on
your phone, you need a compatible e-mail system.
You can write, send, and read e-mail with your phone. You can also save
and delete the e-mail on a compatible PC. Your phone supports POP3
and IMAP4 e-mail servers.
Before you can send and retrieve any e-mail messages, you must do the
following:
• Obtain a new e-mail account or use your current account. To check
the availability of your e-mail account, contact your e-mail service
provider.
• Check your e-mail settings with your network operator or e-mail
service provider. You may receive the e-mail configuration settings
as a configuration message. See “Configuration settings service,”
p. 11. You can also enter the settings manually. See “Configuration,”
p. 64.
To activate the e-mail settings, select Menu > Messaging >
Message settings > E-mail messages. See “E-mail,” p. 47.
This application does not support keypad tones.
Setting Wizard
The setting wizard will start automatically if no e-mail settings are
defined in the phone. To enter the settings manually, select Menu >
Messaging > E-mail > Options > Manage accounts > Options > New.
The Manage accounts options allow you to add, delete, and change the
e-mail settings. Make sure that you have defined the correct preferred
access point for your operator. See “Configuration,” p. 64. The e-mail
application requires an Internet access point without a proxy. WAP
access points normally include a proxy and do not work with the e-mail
application.
To Next Page
Loading...
