Settings
66
Fixed dialling — to restrict your outgoing calls to selected phone
numbers if this function is supported by your SIM card
Closed user group — to specify a group of people whom you can call and
who can call you (network service)
Security level > Phone — to set the phone to ask for the security code
whenever a new SIM card is inserted into the phone. If you select
Security level > Memory, the phone asks for the security code when the
SIM card memory is selected, and you want to change the memory in
use.
Access codes — to change the security code, PIN code, PIN2 code, or
barring password
Code in use — to select whether the PIN code or UPIN code should be
active
Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your phone. See
“Certificates,” p. 87.
Security module settings — to view Security module details, activate
Module PIN request, or change the module PIN and signing PIN. See
also “Access codes,” p. 10.
■ Restore factory settings
To reset some of the menu settings to their original values, select
Menu > Settings > Restore factory settings. Enter the security code.
Note that the data you have entered or downloaded are not deleted, for
example, the names and phone numbers saved in contacts.
To Next Page
Loading...
