Nokia 8850 - Save Calling Card Information

[ 47 ]
Advanced calling features
Save calling card information
1
Press
Menu
4 4 2.
2
Scroll to the calling card information you want to change, then press
Options
.
3
Scroll to
Edit
, then press
OK
.
4
Enter your security code, then press
OK
.
5
At
Dialing sequence
, press
Select
. Scroll to the dialing sequence your
card uses (see chart on the next page) then press
Select
.
Note:
The order of the following steps may vary, depending on which
dialing sequence your card uses.
6
Enter the access number (usually the 1-800 number listed on the back
of the calling card), then press
OK
.
7
Enter the card number and/or PIN, then press
OK
.
8
Your phone displays
Save changes?
Press
OK
.
9
Scroll to
Card name:
and press
Select
.
10
Enter the card name, then press
OK
.
Dialing sequence
Use for cards
that require you to:
Cards using
this sequence
Access no.
+ Phone no.
+ Card no.
Dial the 1-800 access number,
then phone number, then card
number (+ PIN if required).
MCI, AT
&
T True
Choice, Sprint
Canada, Unitel
Access no.
+ Card no.
+ Phone no.
Dial the 1-800 access number,
then card number (+ PIN if
required), then phone number.
networkMCI,
WorldPhone MCI
Prefix
+ Phone no.
+ Card no.
Dial the prefix (any numbers
that must precede the phone
number) and phone number
you want to dial, then card
number (then PIN, if required).
GTE, PacBell, AT
&
T,
Stentor