PAGE 7 (10) Approved 3.0
Nokia Mobile Phones Customer Care E&A
SQX 00471-en MWy
Technical Services, Repair Concepts Confidential 17.06.2002
SOFTWARE UPDATE PREPARATION
To remove the Battery Cover push the lock button
with plastic tweezers and then push the Battery
Cover forward softly.
Lift the Battery Cover up and then pull it out
carefully.
Press down the Grip Cover to release the snap of the
Logo Plate.
Pull the Logo Plate smoothly on both sides.
First, place the Flash Adapter (FLA-16) to the hole on
the left side (no.1). Then press the Adapter down on
the right side (no.2).
Press the adapter carefully downwards with low
pressure, until it clicks. Take care that the FLA-16
adapter fits well.
Service Manual 8910 Level 1&2 Copyright 2002 © Nokia Corporation
To Next Page
Loading...
