PAGE 21 (50) Version 1.0 Approved
Nokia Mobile Phones Customer Care E&A
Technical Services Repair Concepts
Confidential
19.07.2001
4. DISASSEMBLY/ASSEMBLY INSTRUCTIONS
Attention: Before starting this procedure you must take care of ESD precautions like being in your ESD-
area and connecting your armwrist.
1.
Remove the Cover Label carefully
with tweezers. Take care not to
scratch the cover.
2.
Remove the two screws with driver
Torx T6.
Do not use the torquedriver for
loosening because you can damage
or decalibrate it.
3.
Pull back the A-Cover from the
bottom side on. You have to use a bit
more power to release the cover from
its clips. This is a bit tricky, so that
you have to get your own experience.
4. Take away the Phone Keymat.
Service Manual 9210 Level 2 Copyright 2001 © Nokia Mobile Phones
To Next Page
Loading...
