Copyright © 2004 Nokia. All rights reserved.
Phone
40
To manage calls
There are a number of functions you can use during a call. Many of the in-call
options are network services.
To access the functions, press Options during a call. Some or all of the following
in-call options may become available:
Answer - Allows you to answer an incoming call.
Reject - Allows you to reject an incoming call.
Hold/Activate - Hold allows you to put the current call on hold, so that another call
can be made. To activate the original call again, select Activate.
New call - Puts the active call on hold and dials a new phone number.
Send DTMF - Transmits DTMF tones. See ’To send DTMF tones during a call’ on page
61.
End active call - Ends the active call.
End all calls - Ends both the active and held call.
Contacts - Opens the phone book.
Menu - Opens the Menu.
Mute/Unmute - Switches the microphone of the communicator off or on. If the
communicator is connected to a handsfree car kit, Mute also turns off the
microphone of the car kit.
Swap - Allows you to alternate between two calls, an active and a held call.
Transfer - Enables you to connect two voice calls together and disconnect yourself
from both calls. See ’To transfer calls’ on page 60.
Conference - If one call is active and another call is on hold, this option merges them
into a conference call.
Private - During a conference call, Private allows you to converse privately with a
selected participant.
Keypad lock
The keypad lock prevents the keypad keys being pressed accidentally.
When the keypad is locked, you can answer calls normally by pressing . During
a voice call, the keypad is unlocked and the communicator can be operated in the
usual way. After the call, the keypad is automatically locked again.
LindaDeepak_ri.fm Page 40 Monday, September 27, 2004 2:34 PM
To Next Page
Loading...
